|
||||
|
||||
|
||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The SST
- 1 Applicable to all styles of tile and decking substrates. Applicable from 2/12 to 24/12. Available in Copper, Brass, Stainless steel and H.D. Galvanized steel. Standard length - 10 foot per piece. (May be ordered in longer or shorter lengths). Packaged as required per project usage. Applicable to California Title 24. Items A.2., A.3., and A.4. are applicable. |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The
SST-1 is the oldest style of non-penetrating tile fastening systems. Originally manufactured in 250 foot rolls, modified to custom "batten" lengths,from one inch wide metals. Designed for ease of installation, as when applied to slopes greater than 9/12, the SST-1 is many an installer's choice. When mated to the Jiffy Tie wires, the economics of speed are evident. Clearly one of the industries most successful non-penetrating methods, adaptable to just about any tiling situation. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The Hook
and Loop System. Product #104. Applicable to most styles of tile and decking substrates. Applicable from 2/12 to 24/12. Available in Copper, Brass, Stainless steel and H.D. Galvanized steel. Package in boxes of 1000 pieces. Applicable to California Title 24. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Invented
by a tile roofer in the early 1900's, with a formed loop at one end, a length
of wire set from 11 to 17 inches, (Depending on the tiles required exposure),
in the center, and a hook at the other end, gives the #104 Hook and Loop
it's unique look and function. The Loop end is set from the underside of
the tile, up thru the nail hole, with the length of the fastener set to
run the underside length of the tile. Taking another Hook and Loop, lock
the hook end into the exposed loop of the first fastener and tile, set another
tile over this fastener, loop end up thru the nail hole and off you go!
It's faster then it can be described in print. Attaching to the deck at
an average 10 foot on center limits deck membrane penetrations. Stronger
and safer for securing the cover section of two-piece "cap and pan"
tiles then the use of a long tile nail, the fastest "S" tile wire
fastening system known, the Hook and Loop is a technique that provides the
designer and contractor the best of what each values. Contact the factory to verify deck securement and applicable uses. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
